Publikacije
U nastavku su navedeni reprezentativni radovi objavljeni na međunarodnom nivou, na kojima su među autorima članovi Katedre za elektroenergetiku.
Radovi objavljeni u međunarodnim časopisima
[1] Č. Zeljković, P. Mršić, B. Erceg, Đ. Lekić, N. Kitić and P. Matić, "Optimal sizing of photovoltaic-wind-diesel-battery power supply for mobile telephony base stations," Energy, vol. 242, pp. 1 – 16, March 2022.
[2] Đ. Lekić and S. Vukosavić, "Optimization of multiphase single-layer winding end-connections by differential evolution," Electrical Engineering, pp. 1-14, February 2022.
[3] T.M. Șoimoșan, L.M. Moga, L. Anastasiu, D.L. Manea, A. Căzilă and Č. Zeljković, "Overall Efficiency of On-Site Production and Storage of Solar Thermal Energy," Sustainability, vol. 13, no. 3, January 2021.
[4] D. Marčetić and P. Matić, "Nonregenerative Braking of Permanent Magnet Synchronous Motor," IEEE Transactions on Industrial Electronics, vol. 67, no. 10, pp. 8186 - 8196, October 2020.
[5] Đ. Lekić and S. Vukosavić, "Computationally Efficient Steady-State Finite Element Simulation of Multiphase PM AC Machines," IET Electric Power Applications, vol. 14, no. 7, pp. 1228 – 1237, July 2020.
[6] Đ. Lekić, P. Mršić, B. Erceg, Č. Zeljković, N. Kitić and P. Matić, "Generalized Approach for Fault Detection in Medium Voltage Distribution Networks Based on Magnetic Field Measurement," IEEE Transactions on Power Delivery, vol. 35, no. 3, pp. 1189 – 1199, June
[7] Đ. Lekić and S. Vukosavić, "Finite Element Design of Rotor Permanent Magnet Flux Switching Machine with Arbitrary Slot, Pole and Phase Combinations," Electronics, vol. 22, no. 2, pp. 93 – 104, December 2018.
[8] P. Mršić, Đ. Lekić, B. Erceg, Č. Zeljković, P. Matić, S. Zubić and P. Balcerek, "Probabilistic Techno-Economic Optimization in Medium Voltage Distribution Networks with Fault Passage Indicators and Fault Locators," Electronics, vol. 22, no. 2, pp. 80-92, December 2018.
[9] Đ. Lekić and S. Vukosavić, "Split Ratio Optimization of High Torque Density PM BLDC Machines Considering Copper Loss Density Limitation and Stator Slot Leakage," International Journal of Electrical Power and Energy Systems, Vol. 100, pp. 231 – 239, September 2018.
[10] Srđan Jokić, Danijel Mijić and Petar Matić, "An Algorithm for Transformer Hot Spot Temperature Determining," Przeglad Elektrotechniczny, vol. 93, no. 6, pp. 141-145, June 2017.
[11] S. J. Zubić, M. B. Đurić and Č. V. Zeljković, "Speed and Security Improvements of Distance Protection Based on Discrete Wavelet and Hilbert Transform," Electric Power Systems Research, vol. 148, pp. 27-34, July 2017.
[12] S. J. Zubić, M. B. Đurić and Č. V. Zeljković, "Probabilistic assessment of new time-domain distance relay algorithms," Electric Power Systems Research, vol. 119, pp. 218-227, February 2015.
[13] P. R. Matić, M. A. Gecić, Đ. M. Lekić and D. P. Marčetić, "Thermal Protection of Vector-Controlled IM Drive Based on DC Current Injection," IEEE Transactions on Industrial Electronics, vol. 62, no. 4, pp. 2082-2089, April 2015.
[14] Petar Matić, Aleksandar Rakić, Slobodan Vukosavić and Darko Marčetić, "Improved Torque Control of High Speed Shaft-Sensorless Induction Motor Drive," AUTOMATIKA, vol. 56, no. 4, pp. 443-453, December 2015.
[15] D. Marčetić, I. Krčmar, M. Gecić and P. Matić, "Discrete Rotor Flux and Speed Estimators for High-Speed Shaft-Sensorless IM Drives," IEEE Transactions on Industrial Electronics, vol. 61, no. 6, pp. 3099-3108, June 2014.
[16] Č. Zeljković and N. Rajaković, "Integrated Cost-Benefit Assessment of Customer-Driven Distributed Generation," Electronics, vol. 18, no. 1, pp. 54-61, June 2014.
[17] Č. Zeljković and N. Rajaković, "Cost-saving potential of customer-driven distributed generation," Electric Power Systems Research, vol. 92, pp. 87-95, November 2012.
[18] S. J. Zubić and M. B. Đurić, "A distance relay algorithm based on the phase comparison principle," Electric Power Systems Research, vol. 92, pp. 20-28, November 2012.
[19] P. Matić and S. N. Vukosavić, "Speed regulated continuous DTC induction motor drive in field weakening," Advances in Electrical and Computer Engineering, vol. 11, no. 1, pp. 97-102, February 2011.
[20] P. R. Matić and S. N. Vukosavić, "Direct torque control of induction motor in field weakening without outer flux trajectory reference," International Review of Electrical Engineering, vol. 6, no. 3, pp. 1204-1212, May 2011.
[21] P. Matić and S. N. Vukosavić, "Voltage angle direct torque control of induction machine in field-weakening regime," IET Electric Power Applications, vol. 5, no. 5, pp. 404-414, May 2011.
Radovi prezentovani na međunarodnim konferencijama
[1] D. Marcetic, V. Popovic and P. Matic, "MAPT control of PMaSynRM including magnetic saturation," 2022 XIV International Symposium on Industrial Electronics and Applications (INDEL), Banja Luka, Bosnia and Herzegovina, 2022.
[2] P. Matic and D. Marčetić, "Determination of Initial Rotor Position of PMaSynRM Based on DC Current Injection," 2022 XIV International Symposium on Industrial Electronics and Applications (INDEL), Banja Luka, Bosnia and Herzegovina, 2022.
[3] Đ. Lekić and S. Vukosavić, "Novel Approach for Estimating Slot Filling Factor in FEA Based Design of Electrical Machines," 2022 XIV International Symposium on Industrial Electronics and Applications (INDEL), Banja Luka, Bosnia and Herzegovina, 2022.
[4] Č. Zeljković, P. Mršić, B. Erceg, Đ. Lekić, N. Kitić, P. Matić, "Cost Effectiveness of Standalone Hybrid Power Supplies at Different Locations across Europe," 57th International Universities Power Engineering Conference (UPEC 2022), Istanbul, Turkey, 2022.
[5] I. Krčmar, P. Matić, D. Marčetić and P. Marić, "Performance analysis of the speed servomechanism with the adaptive PI controller," 2020 International Symposium on Industrial Electronics and Applications - INDEL 2020, Banja Luka, 2020, pp. 1-6.
[6] Đ. Lekić, P. Mršić, B. Erceg, Č. Zeljković, N. Kitić, P. Matić, "Laboratory Setup for Fault Detection on Overhead Power Lines Based on Magnetic Field Measurement," 2020 International Symposium on Industrial Electronics and Applications - INDEL 2020, Banja Luka, 2020, pp. 1-6.
[7] Č. Zeljković, P. Mršić, B. Erceg, Đ. Lekić, N. Kitić, P. Matić and T. Soimosan, "Probabilistic Techno-Economic Assessment of Wind-PV-Diesel-Battery Power Supplies for Mobile Telephony Base Stations," 2020 International Symposium on Industrial Electronics and Applications - INDEL 2020, Banja Luka, 2020, pp. 1-6.
[8] Č. Zeljković, P. Mršić, B. Erceg, Đ. Lekić, N. Kitić, P. Matić and T. Soimosan, "A Monte Carlo Simulation Platform for Studying the Behavior of Wind-PV-Diesel-Battery Powered Mobile Telephony Base Stations," The 16th International Conference on Probabilistic Methods Applied to Power Systems (PMAPS 2020), Liege, Belgium, 2020, pp. 1-6.
[9] Č. Zeljković, P. Mršić and B. Erceg, "Simulation-Based Energy Assessment of PV Systems Installed in an Urban Environment," In 20th International Symposium on Power Electronics (Ee), Novi Sad, Serbia, 2019, pp. 1-6.
[10] Č. Zeljković, P. Mršić, Đ. Lekić, B. Erceg, P. Matić, S. Zubić and P. Balcerek, "Performance Assessment of Fault Locators and Fault Passage Indicators in Distribution Networks by the Non-Sequential Monte Carlo Simulation," In 2018 International Symposium on Industrial Electronics (INDEL), Banja Luka, 2018, pp. 1-7.
[11] P. Mršić, Č. Zeljković, Đ. Lekić, B. Erceg, P. Matić, S. Zubić and P. Balcerek, "Minimization of Power Interruption Time in MV Distribution Networks with Fault Locators Based on Optimal Placement of Fault Passage Indicators," In 2018 International Symposium on Industrial Electronics (INDEL), Banja Luka, 2018, pp. 1-7.
[12] D. Marčetić, V. Popović and P. Matić, "Simple Procedure for Self-Commissioning of IM Drive," In 2018 International Symposium on Industrial Electronics (INDEL), Banja Luka, 2018, pp. 1-6.
[13] Đ. Lekić and S. Vukosavić, "Program for Finite Element Based Design of Rotor Permanent Magnet Flux Switching Machine," In 2018 International Symposium on Industrial Electronics (INDEL), Banja Luka, 2018, pp. 1-7.
[14] V. Popović, Đ. Oros, D. Marčetić and P. Matić, "Convergence and stability analysis of IM rotor time constant estimators based on MRAS scheme," In 2017 International Symposium on Power Electronics (Ee), Novi Sad, 2017, pp. 1-6.
[15] Č. Zeljković and P. Mršić, "Fast and efficient placement of fault indicators based on the pattern search algorithm," In 2017 International Symposium on Power Electronics (Ee), Novi Sad, 2017, pp. 1-5.
[16] B. Blanuša, B. Knežević, B. Erceg, Đ. Lekić and P. Mršić, "Elevator drives: Present trends and perspectives," In 2017 International Conference on Electromechanical and Power Systems (SIELMEN), Iasi, 2017, pp. 001-009.
[17] A. A. Marković and P. Matić, "Performance analysis of control schemes for direct torque control of dual three-phase induction machine," In 2016 International Symposium on Industrial Electronics (INDEL), Banja Luka, 2016, pp. 1-6.
[18] Đ. Lekić, P. Mršić, B. Erceg and Č. Zeljković, "Three-phase overhead line model for laboratory testing of fault passage indicators," In Mediterranean Conference on Power Generation, Transmission, Distribution and Energy Conversion (MedPower 2016), Belgrade, 2016, pp. 1-8.
[19] Č. V. Zeljković, N. L. Rajaković, "Assessing the investments in customer-driven distributed generation," In 2012 12th International Conference on Probabilistic Methods Applied to Power Systems (PMAPS), Istanbul, 2012, pp. 1-6.
[20] P. R. Matić, A. Ž. Rakić and S. N. Vukosavić, "Stator Voltage Vector Direct Torque Control of induction machine," In 2012 15th International Power Electronics and Motion Control Conference (EPE/PEMC), Novi Sad, 2012, pp. 1-8.
[21] Č. V. Zeljković, N. L. Rajaković and S. J. Zubić, "Customer-perspective approach to reliability evaluation of distributed generation," In 2011 IEEE Trondheim PowerTech, Trondheim, 2011, pp. 1-6.
[22] Č. V. Zeljković, N. L. Rajaković and S. J. Zubić, "An Application of Cost Minimization Algorithm to Economic Justification of Installing Distributed Generation," In 2010 Control Methodologies and Technology for Energy Efficiency (IFAC), Vilamoura, 2010, pp. 243-248.
[23] P. Matić, A. Rakić and S. N. Vukosavić, "Induction motor torque control in field weakening regime by voltage angle control," In Proceedings of 14th International Power Electronics and Motion Control Conference EPE-PEMC 2010, Ohrid, 2010, pp. 108-115.
[24] Č. V. Zeljković, N. L. Rajaković and S. J. Zubić, "A method for cost minimization applicable to load centers containing distributed generation," In 2009 IEEE Bucharest PowerTech, Bucharest, 2009, pp. 1-6.
[25] P. Matić, D. Raca, B. Blanuša and S. N. Vukosavić, "A Direct Torque Controlled induction motor drive based on control of tangential and radial component of stator flux vector," In 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition, Austin, TX, 2008, pp. 1819-1825.
[26] P. R. Matić, B. D. Blanuša and S. N. Vukosavić, "A novel direct torque and flux control algorithm for the induction motor drive," In IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03., Madison, WI, USA, 2003, pp. 965-970 vol.2.
eStudent 
eZaposleni 
ePošta
Српски
English
/ Istraživanje / Publikacije 
+387(51)221-867
+387(51)221-867
power@etf.unibl.org
